R340
- 6C / 12T CPU
- 64GB DDR4 RAM
- SSD and HDD drives
- Unmetered traffic
Dedicated servers in Sweden with high performance, stable operation and easy management in Hexabyte Cloud. Hosted in Umeå with redundant network connectivity and low latency across the Nordics.
Swedish dedicated hosting focused on stable operation, low latency and easy management. Our servers run in Umeå and come with IPv6 and high bandwidth as standard.
Real measurements taken from our dedicated servers in Umeå, northern Sweden.
Stockholm
12 ms
AWS eu-north-1: 12 ms
London
39 ms
AWS eu-west-2: 38 ms · Linode London: 39 ms
N. Virginia
113 ms
AWS us-east-1: 113 ms
Oregon
206 ms
AWS us-west-2: 206 ms
Choose a port speed from 250 Mbit/s to 10 Gbit/s with unmetered traffic, or run the server with no internet connection at all. Internet connectivity runs through our own AS215273.
Our dedicated servers can be paid month to month and have no notice period. We believe business should be fair, simple and flexible.
Support for both IPv4 and IPv6. Additional addresses are available as add-ons.

Hexabyte Cloud gives you access to your dedicated servers, where you can install an operating system, view IP settings, run hardware reboots and more.
If hardware fails, we replace the faulty component. Report the fault to us and we handle the hardware troubleshooting and the replacement itself.
We monitor the network in the data center and our internet connectivity through our own AS215273, so we can see how traffic to your servers is getting through.
Email support@hexabyte.se or open a support ticket in Hexabyte Cloud. Tickets there are linked to your account and your servers.
Our servers are located in Umeå, northern Sweden, which is a strategically good location for servers. Electricity prices in northern Sweden are among the lowest in the country, which keeps the operating cost per server down.
The northern Swedish climate works in our favor when cooling our servers: since it is often cool outside, cooling the data center is cheap.
All our servers support SSD drives. The most common type is SSD with a SATA interface, but we also offer servers with SAS SSD and NVMe SSD to meet different performance needs. An SSD gives you not only higher speed and better performance, but also higher reliability than traditional spinning hard drives.
SSDs (Solid State Drives) in dedicated servers have several advantages that make them the best choice in many situations. First, SSDs are significantly faster than spinning hard drives. This means faster boot times, shorter application load times and faster data transfer rates. For applications that require high performance and fast access to data, SSDs are the obvious choice.
Another important advantage of SSDs is their durability and reliability. Since SSDs have no moving parts, they are less likely to fail from physical shocks or wear over time. This makes them ideal for environments where high reliability is critical.
Despite the advantages of SSDs, there are times when traditional spinning hard drives are still a good choice. Spinning hard drives offer more storage capacity at a lower cost, which can matter for companies with large amounts of data that do not need fast access. When the server supports 3.5" LFF (Large Form Factor) drives, spinning hard drives can be a cost-effective way to store large volumes of data.
At Hexabyte we understand that different companies have different storage needs. That is why we offer a wide range of storage options, including both SSDs and spinning hard drives. Whether you need fast access to critical data or large storage capacity for archiving, we have a solution that fits your needs.
By supporting different types of SSDs, including SATA, SAS and NVMe, we can make sure our customers get the best performance and reliability for their specific applications.
A dedicated server is a physical server that is entirely yours. Unlike a VPS, you share neither CPU, RAM nor storage with other customers. All the hardware is reserved for you, which gives predictable performance and full control over the environment.
Yes. Since you have full access to the hardware, you can run any hypervisor you like, such as Proxmox, VMware or KVM, and create your own virtual machines. Many of our customers use their dedicated servers precisely as virtualization hosts.
A dedicated server gives you full control, but also full operational responsibility for the operating system, updates and security. If you do not have that expertise in-house, a VPS may be a better fit. Also think about how much storage, RAM and bandwidth you need before choosing a model.
If hardware fails, we replace the faulty component. The servers are equipped with redundant power supplies and run in a data center with redundant power, cooling and network connectivity to minimize downtime.
As the customer, you are responsible for backing up a dedicated server. We recommend combining your server with our object storage for secure, EU-based storage of your backups.